Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Sheet Metal "Puke Tanks"

+ Reply To Thread
Posts: 31-40 of 63
2010-05-19 01:49:26
#31
2010-05-19 21:10:23
#32
looks great. the quality of this piece is to perfection. i'll be saving my pennys to get this also.
2010-05-20 02:36:21
#33
Looks cool. Is the pickup and discharge below fluid level. I believe it needs to be the lowest point otherwise it will not be able to pull fluid in if the fluid level gets too low.
2010-05-20 02:48:03
#34
Very nice piece. I'm heavily considering this, but I'll wait to see pics of one with the indicator.
2010-05-31 00:36:46
#35
I will be building one here shortly with the indicator.
2010-06-03 01:08:35
#36
Originally Posted by Overkill
I will be building one here shortly with the indicator.


Will you be building mine soon too I am not in a rush at all just want to know when to expect it.
2010-06-03 01:35:09
#37
Originally Posted by Overkill
Here is a couple better pics.




You need to increase your bend radius. Too tight for that material. Some serious stress cracks there from the bend. They could propogate into real cracks over time from vibration and heat cycling. Luckily those tanks don't go through any stress so shouldn't be a big deal.
2010-06-03 15:15:55
#38
Originally Posted by Jimithin7000
Will you be building mine soon too I am not in a rush at all just want to know when to expect it.


Yours is done, just have to make one more bracket to hold it in. I am starting on the NX MOnday, CA and what not. But I will be finishing the tanks first.

Mark
2010-06-03 15:20:46
#39
Originally Posted by Overkill
Yours is done, just have to make one more bracket to hold it in. I am starting on the NX MOnday, CA and what not. But I will be finishing the tanks first.

Mark


Cool thanks for the update!
2010-06-03 15:52:51
#40
just my opinion but souldnt a fluid level be standard on things like this?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top