Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Plug covers

+ Reply To Thread
Posts: 61-70 of 103
2009-02-22 03:42:12
Ok now I see the step. Mine doesnt need the step because I have counter bored the threaded portions to have a flat piece.

I also did mine out of aluminum not steel (even SS will eventually rust).

As far as engraving, no problems there, I could engrave a picture of your face on there if you wanted
2009-02-22 07:19:38
Originally Posted by zer099
I posted this in your thread for the Rs but I thought I would post here as well with a pic: Full covers look awesome on our VCs. I had a guy in the UK do mine and it turned out very nicely. SS with engravings and color to boot:

That is nice!!!!! I would like one of these for my GTiR.
2009-02-24 17:35:29
Any update?
2009-02-24 17:52:29
1st coat of powder.

2009-02-24 23:25:16
Oh that is nice, that color is hot as **** hahaha thanks!
2009-02-26 22:28:50
bump for some sales on the VE,RR covers... I have a few in stock ready to be shipped!!
2009-02-27 10:40:02
I noticed that you put a translucent coat over a bare metal that looks to be sanded. You might want to consider using a chrome basecoat to cover the imperfections such as sanding marks, color variations in the metal, spotting etc etc. Tiger Powdercoat which I use has a really nice one called Xtreme Chrome which you might want to look into.

Otherwise good work.
2009-02-27 15:05:56
Yeah, that is exactly what we were going to do. It was our first attempt with this candy color.

Thanks for the advice
2009-02-27 21:18:08
Well if you have any questions feel free to PM me or whatever. Ive been doing powdercoating for about 4 years now.
2009-03-03 01:04:41
Any new updates with my VC or the Plug covers?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top