Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 91 & 92 nx owners.....abs mc question

+ Reply To Thread
Posts: 11-20 of 26
2011-06-28 03:11:52
#11
Did you bleed them in the correct order?
2011-06-28 04:14:41
#12
The early abs systems deployed in the B13 was junk IMO, the non abs brake pads a bigger and stop better than abs equipped cars. The modulation was way to slow and soft to be of much benefit.
2011-06-28 04:52:07
#13
'92 NX2K

At first I thought mine didn't have ABS as the MC only has two lines coming out of it like my sentra's but looking at the window sticker... it has ABS

I want to get rid of it, but sourcing the correct parts is a bit difficult.
2011-06-28 05:50:48
#14
i try to answer what i know about the abs.

In germany i would say 98% of all NX2000´s come with ABS.
As you allready found, the master brake cylinder with ABS comes with two brakelines.
Primary and secondary brake circuit. The are installed diagonal.

But why would someone remove his installed and working ABS System?

I replaced my master brake cylinder and my brake booster with parts out of a 300ZX Z32.
2011-06-29 04:14:24
#15
Originally Posted by M!K3
But why would someone remove his installed and working ABS System?


Jiez. I removed my working airco. Deal with it.
2011-06-29 04:49:46
#16
Originally Posted by Blair
Did you bleed them in the correct order?


The setup was blead several times.Pedal still soft....
I'll get to the bottom of this in a few days.
Last edited by Kleensleeper on 2011-06-29 at 05-38-25.
2011-06-29 05:10:55
#17
Originally Posted by richardwbb
Jiez. I removed my working airco. Deal with it.


This is something i understand. But removing the ABS system is a little bit different, or not?

Okay but i think this is going off topic. Shall we leave it at that, then?
2011-06-29 05:16:06
#18
[wtf]wtf[/wtf]:?<
2011-06-29 06:17:01
#19
Originally Posted by M!K3
i try to answer what i know about the abs.

In germany i would say 98% of all NX2000´s come with ABS.
As you allready found, the master brake cylinder with ABS comes with two brakelines.
Primary and secondary brake circuit. The are installed diagonal.

But why would someone remove his installed and working ABS System?

I replaced my master brake cylinder and my brake booster with parts out of a 300ZX Z32.


The early ABS don't work well at all. They can actually be dangerous on race cars and do all kinds of crazy stuff under heavy braking, high temps and so on.

I think when the SE-R cup was still around ABS actually had to be removed or disabled
2011-06-29 06:31:11
#20
My 92 used to have abs. I bought all the lines and distro block to convert mine to non abs. Then upgraded to an altima MC.
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName