Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: can 9.1 ohm injectors be ran on the nemu?!?

+ Reply To Thread
Posts: 1-4 of 4
2016-06-20 12:26:21
can 9.1 ohm injectors be ran on the nemu?!?
I have a set of 9.1 ohm injectors I am looking at. my question is can they be safely ran with my nemu? would resistors be needed? any advice would be greatly appreciated. @JKTUNING , @OnTheChip
2016-06-20 15:36:30
The NEMU board doesn't change the injector drivers of the stock ECU.
2016-06-20 17:13:16
You would need resistors to increase the ohm on the injectors to match what the stock ecu needs to see..

IIRC I believe it's around 12ohms or so...
2016-06-22 10:16:29
nvm, found answer
Last edited by 200sx Se on 2016-06-22 at 10-24-36.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top