FS: S13 suspension, oil pan
Couple things for sale, locally, to try to avoid shipping:
1. S13 240SX suspension. Was on my coupe for roughly 9k miles, so plenty of life left.
-KYB AGX adjustable shocks/struts. No leaks I can find, and I only ran them on 2 front and 2-3 rear, never set them stiff. They should last a good long time.
-KGMM S21 SuperSport springs (yes, KGMM is the brand name). These are high-quality Japanese-made springs, fairly uncommon in the US. I've only ever seen a few sets for sale on Ebay or Zilvia. Rates are 4.6 kg/mm front, 3.8 kg/mm rear. MUCH stiffer than Eibach, Tein, whatever, the only stiffer coil springs for the 240 are RSR. It's not intuitive, but this actually contributes to a higher ride quality.
-Front setup comes with Koni bumpstops. None on the rear, sorry.
Price: $400. I feel this is reasonable. A new set of AGXs is $450 minimum and probably more; the springs often go for at least $250, used.
I cleaned up these items before taking pics. What looks like dirt is actually overspray from when Painter's Lane painted my car. What looks like duct tape is duct tape
When I installed these, I was still also running a B13 Sentra, which has rubber on the upper and lower spring perches. I though that the rubber on the 240 had disintegrated with age, and used the tape to keep it from being noisy, before I learned that the 240 just doesn't use anything there.
Here's the nice part - at static length these springs are not long enough that you need to compress them. Bolt on your upper mounts, bolt it to the car, and drive away. I have front upper mounts I can also provide for an additional cost, but I don't have any rears to spare right now, sorry.
Pics:
Front:
Rear:
All:
Ride height with KA24E:
Ride height with SR:
Wheels in all pics are 16 inch.
2. Greddy ripoff big oil pan for S13 or S14 SR20DET. That's right folks, it's a fake. However, it's never leaked, never caused a problem. Comes with the hardware pictured; goop it up with RTV and slap it on. Includes a drain plug (it's an Allen plug with some kind of tapered pipe threads) but I do NOT have a 1/8NPT plug for the sensor port, you'll either need to run a sensor or find your own plug. Has the hinged baffles inside to keep oil by the pickup. I ran this for over four years, had it off and back on a number of times. It's painted with 5-7 coats (can't remember) of 500 degree primer, silver, and clear. $50 and it's yours.
Please PM if interested. I'll meet within an hour or so of Cincinnati, otherwise you pay shipping.
1. S13 240SX suspension. Was on my coupe for roughly 9k miles, so plenty of life left.
-KYB AGX adjustable shocks/struts. No leaks I can find, and I only ran them on 2 front and 2-3 rear, never set them stiff. They should last a good long time.
-KGMM S21 SuperSport springs (yes, KGMM is the brand name). These are high-quality Japanese-made springs, fairly uncommon in the US. I've only ever seen a few sets for sale on Ebay or Zilvia. Rates are 4.6 kg/mm front, 3.8 kg/mm rear. MUCH stiffer than Eibach, Tein, whatever, the only stiffer coil springs for the 240 are RSR. It's not intuitive, but this actually contributes to a higher ride quality.
-Front setup comes with Koni bumpstops. None on the rear, sorry.
Price: $400. I feel this is reasonable. A new set of AGXs is $450 minimum and probably more; the springs often go for at least $250, used.
I cleaned up these items before taking pics. What looks like dirt is actually overspray from when Painter's Lane painted my car. What looks like duct tape is duct tape
When I installed these, I was still also running a B13 Sentra, which has rubber on the upper and lower spring perches. I though that the rubber on the 240 had disintegrated with age, and used the tape to keep it from being noisy, before I learned that the 240 just doesn't use anything there.Here's the nice part - at static length these springs are not long enough that you need to compress them. Bolt on your upper mounts, bolt it to the car, and drive away. I have front upper mounts I can also provide for an additional cost, but I don't have any rears to spare right now, sorry.
Pics:
Front:
Rear:
All:
Ride height with KA24E:
Ride height with SR:
Wheels in all pics are 16 inch.
2. Greddy ripoff big oil pan for S13 or S14 SR20DET. That's right folks, it's a fake. However, it's never leaked, never caused a problem. Comes with the hardware pictured; goop it up with RTV and slap it on. Includes a drain plug (it's an Allen plug with some kind of tapered pipe threads) but I do NOT have a 1/8NPT plug for the sensor port, you'll either need to run a sensor or find your own plug. Has the hinged baffles inside to keep oil by the pickup. I ran this for over four years, had it off and back on a number of times. It's painted with 5-7 coats (can't remember) of 500 degree primer, silver, and clear. $50 and it's yours.
Please PM if interested. I'll meet within an hour or so of Cincinnati, otherwise you pay shipping.
Be the first to like this post.
Back to top
