Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Pre-Purchase: 32V SR16VE Helical LSD

+ Reply To Thread
Posts: 301-310 of 438
2014-08-25 20:56:49
#301
Originally Posted by MFactory
Hey guys,

sorry for not updating this thread in a while. For some reason, I've not been receiving any notices from the forum for new posts/pm's.

we've found another small clearance issue, but again, this is a simple modification on our end for the production units.

I must apologise sincerely for the long delay on these LSD's, but we are very close now!

Thanks!


I'm local to you guys so is local pick up possible when these units are ready?
2014-08-27 04:39:26
#302
Yup, pickup is possible
2014-09-03 11:01:13
#303
i'd just like to apologize for the delay in updates, and to fill in readers with some info, and i will stress that my diff pictured is a pre-production item, NOT THE ONE you guys will get. i have emailed stephen about this, and i guess he has already got some revised casing's to start a run shortly. probably best to show some pictures. lets compare a quaife 32a to mfactory 32v.

[URL=""][/URL]

now look at the highlighted area on the mfactory one.

[URL=""][/URL]

easy to see its a good bit thicker/wider than the quaife there. well its a few mm too thick, and contacts the case. the solution (for me) is machine it back a bit. its a very thick case.compare the hole depth to the quaife ones near the top bearing.

[URL=""][/URL]

well, it fits now, and hopefully my gearbox will be back together this week. i plan on putting it straight in my ride, along with a hydro clutch conversion, and hopefully get some video's organised soon. should be a whole lot of fun coupled with a mfactory
4.78 final drive.
2014-09-07 22:34:50
#304
Please keep us updated. I am in a serious need for one of these.
2014-09-09 04:38:46
#305
[URL=""][/URL]
[URL=""][/URL]
[URL=""][/URL]

the transformation from a viscous 4.4 ratio cable clutch, to a helical 4.78 solid case hydro clutch is complete. talking to the trans guy it appears all good, all gears select good,axles fit.done. hopefully he will get a window to install it late next week

over to you guys...
2014-09-09 05:36:34
#306
Looking good.
2014-09-20 16:51:55
#307
Nice unit
2014-09-29 13:38:35
#308
bump
2014-10-02 07:12:26
#309
[URL=""][/URL]

its about this far away! just finishing off my hydro clutch, and the lhs cv is being a right pain in the ass to get in, but it all should be good tomorrow.
2014-10-02 15:42:08
#310
Cool let us know how it feels when you drive
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top