Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Drag Racing Wheels.. Wheel/Slick combo available

+ Reply To Thread
Posts: 21-30 of 32
2010-06-20 15:28:06
#21
I think I will need to order a set once I am closer to completing my project. I don't know if these deals will still be around but I hope so!
2010-12-12 02:21:19
#22
how would a 9" tire work out on these. I know it's not a problem on an 8" but not sure about 7.5".
2010-12-12 06:33:37
#23
You should be fine. I'm running an 8.9" wide m&h on a 7" wide wheel just fine. with that much sidewall you can easily get away with a much wider slick than the wheel.
2010-12-13 20:40:49
#24
thanks ashton
2010-12-19 15:38:32
#25
Originally Posted by ashtonsser
You should be fine. I'm running an 8.9" wide m&h on a 7" wide wheel just fine. with that much sidewall you can easily get away with a much wider slick than the wheel.


think you should talk to John over at M&H about that. 9" tire they recomend 7.5-10" rim width. to narrow of a rim can cause problems
2010-12-19 19:30:38
#26
Yeah if you go too skinny of a wheel you can have problems with bead sealing. Ive seen that. The wheels i was using were fine though and didnt have problems.

Im now ditching those and going to run a pair of 26X8.5X15 on some 15X7 wheels. They require tubes anyways so not like you have to worry about bead seal.
2010-12-19 22:46:12
#27
Does it cost anything extra for mazworx to bore out the centers??
2010-12-20 00:17:27
#28
lenso/exospeed's are played out, so many people have them
2010-12-20 02:24:24
#29
Originally Posted by chapnutz1
lenso/exospeed's are played out, so many people have them


wonder why?
2010-12-20 14:32:27
#30
Originally Posted by WRX_PWNER
wonder why?



every Honda under the sun had them, the spinweks wheels are bad ass, I'm going to sell my v2's and get a set of those
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top