Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Engine management system comparison.

+ Reply To Thread
Posts: 71-80 of 87
2012-05-09 00:59:38
#71
Now I know what NismoTronic, NEMU, and TunerCode is!
2012-05-09 01:08:08
#72
Originally Posted by BenFenner
Now I know what NismoTronic, NEMU, and TunerCode is!


About time

Let me know if there is anything else that you need help with.

BTW are the Nistune Prices USD or AUD $?
2012-05-09 01:14:04
#73
Fuck if I know.
2012-05-09 01:19:56
#74
Originally Posted by BenFenner
Fuck if I know.


Reason I say, prices where much higher on Nistune website. Granted PMLS probably gets a nice discount.

Originally Posted by Vadim

NISTune
ECU Version: OBD1 and OBD2
Firmware: OEM Only
MSRP: $620-$773 USD (See Price Breakdown)

You can purchase this brand new from NISTune

Price Breakdown: (Prices are AUD)
B13 NIStune Type 3 Board - $240
B14 NIStune Type 4 Board - $260
NISTune Software License - $200
PLMS USB Consult cable - $95

(I'm separating out the Installation and shipping rates due to it being international rates and are a good bit more then US Vendor's rates)

Self Installation:
Shipping - $26
Paypal Fees - $17
Totals - B13 $578 AUD ($620 USD) - B14 $598 AUD ($640 USD)

Installed:
Installation - $60
Shipping - $85
Paypal Fees - $20
Total - B13 $700 AUD ($752 USD) - B14 $720 AUD ($773 USD)
2012-05-11 05:07:38
#75
Here is my first crack at it:




MegaSquirt III:

Notes:
Megasquirt 3 is available as a kit you solder yourself, or prebuilt using surface mount components. There is also the MS3x (extender) which attaches to the ms3 cpu board to add more inputs and outputs. See detailed comparison:

Megasquirt Product Comparison

Megasquirt III with MS3X is intended for DIY install and most installs are self tuned. With Megasquirt you get the opportunity to learn how engine management works and gain full tuneability of your engine. Be sure to read the documentation.

Features (ms3 + ms3x):
8 fuel outputs
8 spark outputs (logic level)
6 relay outputs
2 or 3 wire pwm idle control
SD card datalogging
Support for stock nissan sensors (including DET CAS) as of pre 1.1 beta 19 see changelog: MS3 pre-1.1 beta 19 released
CAN bus support for external driver boards and AIM dash http://www.msextra.com/forums/viewtopic.php?f=131&t=42807

Licensing:
Hardware PCB layout is proprietary and closed source.
Hardware schematics are proprietary and viewable source.
Firmware is proprietary and viewable source.
Info links: licensing info

Installation:
Stub.

Communication:
USB

Software Interface:
TunerStudio MS Lite (closed source, free download)
TunerStudio MS Registered Edition (closed source, $49.95 download)
MegaTunix (open source, free download)

Reliability/Known Issues:
  • PCB version 3.0 has power supply issues. Info links: 1 2

Cost:
$640 (ms3 + ms3x pre-assembled)
$365 + $90 (ms3 + ms3x assemble your own)

Pricing is from www.diyautotune.com

Research Links:
Last edited by jasonb on 2012-05-11 at 14-50-39.
2012-05-12 16:28:22
#76
i'd like to try out the free ems. how hard for a noob to get started? is there a pcb you can buy?

source on github with a debian repo for toolchain wow.
2012-05-12 16:36:41
#77
jasonb, thanks for the MSIII info! I'll add it ASAP.
As for FreeEMS, let me get you in contact with the main developer.
2012-05-23 16:23:45
#78
I've added MS3 to the list, and I've asked some EMS folks to help contribute first-hand knowledge of EMS systems they are familiar with so we can flesh out this list a bit more.
2012-07-09 19:52:19
#79
Originally Posted by wnwright
Just for completeness you can add Adaptronic to the list. Natively it will make you run wasted spark, but with some setting changes you can get it to run sequential.

Adaptronic - Energise Your Engine!


Adaptronic looks very impressive!

Brent
2012-07-09 20:02:17
#80
Originally Posted by jasonb
ms3 + ms3x will now give you sequential injection using stock nissan sensors, including det CAS (1 degree accurate wheel).

i don't have data on the 20v cas yet, still hoping somebody will sell me a vvl head + cas

Ms3 sr20det first start - YouTube


Miko has a couple 20v CAS 's for sale.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top