Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: engine harness

+ Reply To Thread
Posts: 1-6 of 6
2014-05-16 04:26:18
#1
engine harness
Can I use a 95-97 engine harness on a 99 se-l?
2014-05-16 09:51:19
#2
You can make it work. Why do you want to do this?
2014-05-16 18:03:36
#3
Oh cause I made my car 5spd & im using the auto harness but I wanna plug the tranny up the idle drops low when I come to a complete stop & sometimes it dies
2014-05-16 19:59:32
#4
Did you set the auto harness trans switch to neutral? The car should idle fine while running stopped or moving. Try bumping the idle up a bit.
Last edited by se200 on 2014-05-16 at 20-01-01.
2014-05-19 12:40:45
#5
You can use it but a 95-97 will throw a code on a 98-99 unless you repin some stuff
2014-11-19 22:05:54
#6
If you don't mind me asking what ECU did you end up using for your conversion? i am wondering if i can use a 1995-99 as long as it is from a 2.0L 5speed example 96 200sx ser-r/ 98 200sx se-r sentra se 2.0L
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top