Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Pictures of 93 harness's

+ Reply To Thread
Posts: 1-10 of 19
2013-05-29 05:26:14
#1
Pictures of 93 harness's
I'm looking for some pictures of some 93 harness's laid out. I tore mine all apart to clean and retape them, but I'm kinda confused on how they lay out. I'm looking for Engine harness, alternator harness and starter harness pictures. Thanks!
2013-05-30 18:42:51
#2
No body has any pictures of something they've sold before or have 1 laying around?
2013-05-30 19:48:59
#3
I have pics of my '94 engine harness. It should be [almost] identical to yours. The forum won't show you the full res. View the image in another tab to see full res.
If you're curious what anything is, ask and I'll answer.

138) Engine wiring harness modification and looming / 20V coil install


With loom removed, but everything where it belongs. Ignore the Innovate Wideband controller. Also pretend you don't see COP wiring including those 4, grey plugs by the ECU plug. Oh and ignore the MAP and IAT sensor plugs?
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/477282_10150781814090100_310063896_o.jpg


After I finished looming it for the most part. Again, ignore the extra stuff.
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/465296_10150781838155100_794034889_o.jpg
Last edited by BenFenner on 2013-05-30 at 20-50-57.
2013-05-30 20:14:51
#4
Heres the thing, 94 has separate injector harness...
Any idea if the other part of the engine harness and alternator harness are the same or not though?
Last edited by LikeTheMovies on 2013-05-30 at 20-18-02.
2013-05-30 20:17:42
#5
I was not aware of that difference. For reference, the plug that goes to the 1994 injector sub-harness in the top picture is the light-grey plug down and to the right of the firewall grommet. In the second picture it is the grey plug directly below the firewall grommet, and is the right-most of those three plugs grouped together.

I guess that might not help much? Can I help more?


The starter harness, are you talking about just the 4-gauge wire that goes from the starter to the battery terminal? Or are you talking about the solenoid wire?

The alternator harness, I might have pics for...
Last edited by BenFenner on 2013-05-30 at 20-20-17.
2013-05-30 20:46:12
#6
The battery + harness is the same apparently from 91-93 94 is different. 93 uses a different Engine harness then 91-92 and 94 as well. Alternator harness not sure if same or different.
2013-05-30 20:50:34
#7
2013-05-30 20:59:57
#8
The engine harness is pretty simple, just a few odds and ends I need help matching and really just how they look so I can tape it all back together. There are 2 yellow/green 1 wire on the I guess battery cable harness, 1 goes to Oil Pressure switch 1 goes to coolant temp. I don't know which goes to which and 1 has a cut off connector. I'll get pictures tonight.
2013-05-31 21:00:02
#9
@BenFenner these are a few of the lost wires im confused on.

Possibly starter? but wire is cut.

Knock Sensor?

This is where the 2 yellow/green wires come in at but don't know which pin is for what sensor.

Believe this is for the speed sensor, but dont know where the other side connects to.
2013-05-31 21:03:09
#10
I think I have the harness you are looking for in my NX

I can go snap some pics if you tell me what to shoot.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top