Thread: trying to get stereo to work. (fixed)

Lol

Dohhh. Hahaha

HAHAHA whoops sorry. i'll give it a swicth a roo and see if it works now.

i switched it but still nothing. i took apart the dash. to get to the radio to see if i can get to a fuse but there's no fuse back there just wires.

EDIT: i found a diagram to find the 10A fuse in the back of the stereo , i'll have to take apart the dash again. and see whats up.

Ooh, you mean your radio won't turn on? Have you bolted the bracket on to the radio and then the car? Cause the radio is suppose to ground off the brackets and not the wiring.

yeah that one bracket in pic 3 below my glove , its bolted on there . but still nothing.

I'm not sure, but shouldn't there be a small wire that should be placed between the radio/bracket and the chassis? At least, that is the case with both my NX and my Pulsar NX. It's a small wire with a metal eye on the end, through which a bolt must be placed.

not that I Know of, there is a ground point on the bottom of the dash.

just making sure we are clear, the bracket is bolted onto the radio and the radio is bolted onto the dash correct?