Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: led change over

+ Reply To Thread
Posts: 21-30 of 45
2010-08-12 20:13:40
#21
yellow squares
2011-03-01 03:39:55
#22
Here is my order minus the side markers which are referenced in my last post, hope this helps someone!

Product Description Price Quantity Total

CF13JL-02: LED Bulb Flasher Unit $ 12.95 4 $ 51.80
(For Blinkers to blink/flash)

1156-x18-T: 18HP-LED BA15S Tower Bulb
Options: 1156-A18-T: Amber $ 17.95 4 $ 71.80
(For Front and Rear Blinkers)

T10S-TW: 168/194 (WLED) Twist Lock Wedge Base Socket $ 1.19 3 $ 3.57
(For Instrument/Gauge Cluster)

WLED-x5: 5 LED Wide Angle Wedge Base Bulb
Options: WLED-CW5: Cool White 0.95 $ 3.94 3 $ 11.82
(For HVAC Lighting)

WLED-x5: 5 LED Wide Angle Wedge Base Bulb
Options: WLED-A5: Amber $ 2.99 3 $ 8.97
(For Instrument/Gauge Cluster)

WLED-x-x: 1 LED Wedge Base Bulb
Options: WLED-W-120: Cool White 120 Degree 0.60 $ 1.39 2 $ 2.78
(For License)

3022-xHP4: 4 High Power LED Festoon Bulb
Options: 3022-WWHP4: Warm White $ 6.95 1 $ 6.95
(For Dome)

1157-x18-T: 18HP-LED BAY15D Tower Bulb
Options: 1157-R18-T: Red $ 17.95 4 $ 71.80
(For Brake lights)

1156-x18-T: 18HP-LED BA15S Tower Bulb
Options: 1156-CW18-T: Cool White $ 17.95 2 $ 35.90
(For Reverse lights)

74-xHP3: Wedge Base LED bulb $ 3.49 2
Options: Cool White
(For HVAC)
Last edited by noahman on 2011-03-01 at 04-00-34. Reason: updating list
2011-03-01 10:41:51
#23
theres 4 bulbs in the cluster, and only 2 in the HVAC.. idk what car this is for though..
2011-03-02 20:18:58
#24
yeah if this is for a sentra they use 1157s up front for the blinkers, and 74s for the gauge cluster indicators
2011-03-03 12:47:56
#25
Originally Posted by nrlulz
For turn signals you do need a new flasher otherwise it will just make this horrid grinding noise and not work, from superbrightleds where I got mine the part number is CF13JL-02 (for a B14 anyway), and for tail/brake lights (center brake light it doesn't seem to care) I think you need load resistors but I am running without them just fine, all that happens is if you have the cruise switch on (the one by the dimmer) and you push in the clutch while not braking the cruise light on the dash flashes... it's weird I know, but it only happened since I did the LED conversion. Everything else is pretty much straightforward pull out the bulb and put in the LED bulb


I'm really want to do this to my classic. I want to start with the turn signals for now, then the rest of the car. Do you have any idea if this flasher CF13JL-02 fits B13's? Where is located? Under the dash?
2011-03-03 12:59:13
#26
Another question, that webside says that you have to use red LED's with your tail lights, but the bulbs inside the tail lights are white.

How is this? Are the red LED's are going to make the tail lights brighter instead of white LED's?
2011-03-03 13:06:02
#27
no the red led are going to make it dimmer. i know this from personal experience. since the tails are already red adding a red bulb will make it dimmer.

i got stopped a few times thinking that my tails were out because they were dim.

it all about the lumens factor and also angel of the led light too
2011-03-03 13:24:10
#28
Originally Posted by LIUSPEED
no the red led are going to make it dimmer. i know this from personal experience. since the tails are already red adding a red bulb will make it dimmer.

i got stopped a few times thinking that my tails were out because they were dim.

it all about the lumens factor and also angel of the led light too


Then, what LED you recommend for tail lights?
2011-03-04 22:25:58
#29
Originally Posted by Mr
Another question, that webside says that you have to use red LED's with your tail lights, but the bulbs inside the tail lights are white.

How is this? Are the red LED's are going to make the tail lights brighter instead of white LED's?

I have already bought the red ones and will take a before and after picture in the day and night time, hope that helps you decide, and myself if I need to return for 1156-x18-T: 18HP-LED BA15S Tower Bulb in Option: Cool White

Originally Posted by Mr
I'm really want to do this to my classic. I want to start with the turn signals for now, then the rest of the car. Do you have any idea if this flasher CF13JL-02 fits B13's? Where is located? Under the dash?

I was going off post 4 and will report back if it works for my 92 B13

Originally Posted by justin2386
theres 4 bulbs in the cluster, and only 2 in the HVAC.. idk what car this is for though..

It is for a 92 B13, i was looking at the post on how to take a part the gauge cluster and thought it only mentioned three lights, darn, thanks for the information!
2011-03-10 22:24:49
#30
Originally Posted by Mr
Another question, that webside says that you have to use red LED's with your tail lights, but the bulbs inside the tail lights are white.

How is this? Are the red LED's are going to make the tail lights brighter instead of white LED's?


The idea is that the red lens is just filtering out 2/3 of a white light but letting almost all of a red light through. I use red LEDs for my brake lights and they appear way brighter than stock. Dunno if it's because of the color or just because they are really bright though...

Originally Posted by Mr
I'm really want to do this to my classic. I want to start with the turn signals for now, then the rest of the car. Do you have any idea if this flasher CF13JL-02 fits B13's? Where is located? Under the dash?


I'd have a look at the FSM for your car. Won't have a part number for the LED flasher or anything, but compare the diagram to the one on superbrightleds' website to see if the pinout is the same.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top