Originally Posted by jorgiesimports i took the sensor off the front core support and now it wont start anyone know how to bypass this problem its on a 93 se-r
remove the fuse for the air bag system(located under the dash in the fuse panel) reset ecu to clear code if one is present.
on the right hand side 4th fuse from the bottom. its a 10 amp fuse that has three 10 amp fuses below it. Both my 94 se-r and my 92 se-r have it. to reset a code there is a pot on the ecu that you turn.
Originally Posted by jorgiesimports i seen the slot for the fuse but there was not one in it would cutting the wires on the sensor prevent it from starting?
it should not. I still have my air bag fuse in and there are no air bag parts on either of my cars.
found the problem all the wiring is is garbage as some of you know but in the prosses of doing the turbo i fornd a wire that arked out and burned up off the starter
thanks for all the help guys