Thread: HVAC Control Question? Possible WTB:

I wasnt exactly sure what to search for on this subject so anyway...
My B13 hvac fan only works on setting 4. The P10 one looks identicle as far as the front. Does anyone think the P10 one will be a direct fit? I can get a P10 for pretty cheap if it will work.

More then likely your resistor is fried, not the actual HVAC. I think its in the same spot as the B14's (under the glove box). It's a little circuit board about the size of a credit card. You can get a new one for like $25 at most places, or get one at a yard for about $2 but its a risk seeing you might get one that doesnt work as well.

For the record, I know P10, P11, B14, & B13 boards can be swaped... but your fan speeds will be all mixed up. (ie: a B13 board in B14 will swap settings 3 & 4 I believe). So try to get one from an other B13.

No $h*t huh. I would have thought it was the actual hvac box.
I guess when it's not snowing, dark or 20 degrees I'll get upside down and have a look.

ive got a couple resistors if you need one. let me know. i can help if you want to do the g20 hvac conversion too. i did it and it is nice.

Hey, a fellow Spotuckyan. Yeah I'd love to have someone to turn wrenches with.
Hell I have a new header, CAI, lightened FW, Shortshifter & a NX console to install.

Realized my discription as to were the resistor was is vauge so here's a pic from the FSM to help you out:

Very nice, thanks a ton.

pm me when you feel like doing the installs. glad to help