Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Clutch return spring

+ Reply To Thread
Posts: 1-6 of 6
2016-04-11 01:54:06
Clutch return spring
Hey all, I have the trans out of my 91nx and I am noticing there's no resistance in the clutch lever. I can move it back and it does not return forward. The return spring is intact and in place with the TOB ON. Is this normal when the trans is off or is the return spring shot? Maybe someone has a spare trans laying around and could check for me?
2016-04-11 13:24:47
It is ok. It should not spring back.
2016-04-11 21:49:53
Weird. What the heck is the spring for? What forces the TOB and lever back where it came from...no way it's the cable...the pp?
2016-04-13 21:02:09
Anyone else agree/disagree?
2016-04-13 21:58:15
it should spring back. I had a trans that did that.... spring was fine, just a bunch of crud on the arm. Give it good cleaning and lube the spring and arm, should be fine afterwards. If the spring does not return back, then the TOB will rest on the PP causing premature failure of the TOB.
Last edited by zeneffect on 2016-04-13 at 21-59-53.
2016-04-14 01:40:16
Interesting. I'll try that this weekend
Last edited by ian on 2016-04-14 at 01-40-53. Reason: Mistake
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top