Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: B13 Sr20de No Start. Spark, fuel injectors don't fire.

+ Reply To Thread
Posts: 31-35 of 35
2016-03-08 03:17:43
#31
Originally Posted by 1fastser
Sounds like it's in open loop


Right, no exhaust means no O2 sensor, so it is going into limp mode. No back pressure is actually what you want. Don't believe that back pressure BS.
2016-03-08 18:00:01
#32
Adjusted the throttle cable. Idles perfect at 850-900rpms
2016-03-10 00:46:32
#33
Now when I WOT while driving it doesn't accelerate the best
2016-03-10 02:43:33
#34
Originally Posted by TRUSE-R
If it doesn't rev past 2K, you might want to take a look at your MAF, MAF connection and MAF wiring.


+1.

This is always almost it
2016-03-18 02:22:56
#35
Car drives pretty good. The guage says it overheats, coolant sender is brand new and the switch is like glued on the connector... Antifreeze leaks from below the intake into the exhaust and makes a lot of smoke. It's a smaller leak
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top