Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: need window seals and trim redone ...Suggestions??

+ Reply To Thread
Posts: 1-9 of 9
2014-07-09 18:27:35
#1
need window seals and trim redone ...Suggestions??
My 93 NX2000 has a few leaks in the windows, and t-tops. I'm hoping someone may know a good place to have them redone here near Wilmington, NC. IF needed i could make a drive, just not trying to have to go 4 hours away lol. any suggestions would be greatly appreciated. thanks in advance.
2014-07-09 19:20:56
#2
Do you need a source for the parts, or a recommendation on a shop to do the labor?
2014-07-09 23:55:07
#3
@Ben

Seems like he is asking about a shop who can handle that for him.

@Peter

Good luck, you cant even get OEM trim and rubber stuff anymore afik.
2014-07-10 01:28:44
#4
Originally Posted by BenFenner
Do you need a source for the parts, or a recommendation on a shop to do the labor?


Either, or. I just dont want to see her go to crap. its a good little car, and i just dont know where to start. if i could find the parts im sure i can get it done. there hasn't been anything i can't figure out, with the proper reading material at least.
2014-07-10 02:19:24
#5
Originally Posted by Peter
Originally Posted by BenFenner
Do you need a source for the parts, or a recommendation on a shop to do the labor?


Either, or. I just dont want to see her go to crap. its a good little car, and i just dont know where to start. if i could find the parts im sure i can get it done. there hasn't been anything i can't figure out, with the proper reading material at least.


Greg V can get the seals for the Doors at GSpec. The T-tops are built in and can't be changed. You have to source a set of Used ones with good seals which is getting harder to come by these days, or be lucky like me and buy the last known set new set in the country.
2014-07-12 01:39:23
#6
Originally Posted by gumby510
Originally Posted by Peter
Originally Posted by BenFenner
Do you need a source for the parts, or a recommendation on a shop to do the labor?


Either, or. I just dont want to see her go to crap. its a good little car, and i just dont know where to start. if i could find the parts im sure i can get it done. there hasn't been anything i can't figure out, with the proper reading material at least.


Greg V can get the seals for the Doors at GSpec. The T-tops are built in and can't be changed. You have to source a set of Used ones with good seals which is getting harder to come by these days, or be lucky like me and buy the last known set new set in the country.


G Spec Performance
this the gspec your referring to? and if so should i just give them a call and ask for greg v ?
or?
2014-07-12 03:29:58
#7
Originally Posted by Peter
Originally Posted by gumby510
Originally Posted by Peter
Originally Posted by BenFenner
Do you need a source for the parts, or a recommendation on a shop to do the labor?


Either, or. I just dont want to see her go to crap. its a good little car, and i just dont know where to start. if i could find the parts im sure i can get it done. there hasn't been anything i can't figure out, with the proper reading material at least.


Greg V can get the seals for the Doors at GSpec. The T-tops are built in and can't be changed. You have to source a set of Used ones with good seals which is getting harder to come by these days, or be lucky like me and buy the last known set new set in the country.


G Spec Performance
this the gspec your referring to? and if so should i just give them a call and ask for greg v ?
or?


That is GSpec and Greg V that they were referencing. He is a Nissan parts pimp. Hit him up, he'll take good care of you.

That being said, finding new OEM seals may be impossible for a 20+ year old niche car. Worst he can say is no. Good luck man!
2014-07-12 17:31:04
#8
http://www.sr20-forum.com/g-spec-performance/63846-official-nx-hardtop-weatherstrip-thread.html
Most of this is for a hard top but he may be able to get T tops. Just call or Email him and let us know. To be honest your leaks are most Likely coming from the T tops. If you open the door and your door seals have chunks out of them then try and call Greg. I would start with trying to get a set of used T tops, some people in the past have sold them here. As much as I hate to say this try E Bay or your local junkyard, The problem I have run across at junk yards is that you need a key to remove them so I have not been able to take them with me. Most of the ebay guys have the key included, just ask for more detailed pics than what is provided in the Auction. This guy is an ass hat 160$ a side look at the condition of those, once you take them out those are going to leak to just by looking at the condition of the outside seals. http://www.ebay.com/itm/Nissan-NX-series-1600-2000-T-Top-Driver-side-NICE-/251582804041?pt=Motors_Car_Truck_Parts_Accessories&hash=item3a9380f049&vxp=mtr


Good luck man and don't give up!
Last edited by gumby510 on 2014-07-12 at 17-56-59.
2014-07-13 05:42:25
#9
...and update if you're ever able to make contact.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top