Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Wheel Hop? Why?

+ Reply To Thread
Posts: 11-20 of 32
2014-06-02 20:54:13
#11
It could be the clutch is grabbing harder now like Kyle said, or it could be the springs in the clutch resonating at a different frequency (or maybe you went to an un-sprung clutch which would also change the harmonics).
2014-06-02 21:16:16
#12
I went to a 6-puck sprung.
2014-06-02 21:21:15
#13
Originally Posted by Storm88000
Originally Posted by Kyle
Maybe you went from a slipping clutch to a properly engaging clutch? I dunno, just spit-balling now.




Ha, I was going to post that exact same thing but then I thought someone like morgan would make fun of me. again.


i dont make fun of you bud only criticize people for doing things harder than they have to be done. thats my way of opening up peoples eyes to other ways of thinking on how to go about the task at hand sorry if you got offended
2014-06-02 21:45:50
#14
Originally Posted by msnx2k
I went to a 6-puck sprung.
You must be making over 250 WTQ?
2014-06-02 22:47:32
#15
Originally Posted by morgans432
Originally Posted by Storm88000
Originally Posted by Kyle
Maybe you went from a slipping clutch to a properly engaging clutch? I dunno, just spit-balling now.




Ha, I was going to post that exact same thing but then I thought someone like morgan would make fun of me. again.


i dont make fun of you bud only criticize people for doing things harder than they have to be done. thats my way of opening up peoples eyes to other ways of thinking on how to go about the task at hand sorry if you got offended




No offense taken man. I just know your not one for small-talk only plain facts. its all good everyones different
2014-06-02 22:51:55
#16
Originally Posted by BenFenner
Originally Posted by msnx2k
I went to a 6-puck sprung.
You must be making over 250 WTQ?


You forgot to put a " "
2014-06-03 04:42:36
#17
My car is also plagued with wheel hop, so bad I keep breaking motor mounts or motor mount bolts. I have every bolt on go fast part thats needed to stop wheel hop but no luck. Im running full ES bushings on the car(every bushing is ES and in good condition). All axles, bearings and ball joints are new due to 6spd swapping the car. I'm running prothane poly motor mounts and I keep breaking the rear motor/trans mount and dog bone, the bolts break off or the mount snaps/rips. I have brand new BC coilovers and Im running sticky tires. I never had this issue with my 370whp det stock trans setup. I am making traction bars and solid motor mounts now to see if that helps. I'll let you know if I find the cure. PS I'm making 360-400hp depending on how much boost I run on my ve-t and it spins like crazy or wheel hops to death.
2014-06-03 05:45:28
#18
If I am making 250 Wtq off of the mods in my sig, then I must be using magic gas.
2014-06-03 06:45:56
#19
I'd say you should try softer tires
2014-06-03 06:59:55
#20
Originally Posted by msnx2k
If I am making 250 Wtq off of the mods in my sig, then I must be using magic gas.


NAWS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top