Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: RWD trans sr20ve

+ Reply To Thread
Posts: 1-3 of 3
2008-06-11 22:26:59
#1
RWD trans sr20ve
I am looking into swapping a sr20VE into another car and am looking for a short rwd trans that shares the same bell housing pattern as the rwd ka24de. I have an adapter plate to bolt the fwd engine to the rwd ka trans but the 240sx trans is simply too long. I'm looking for a much shorter trans for this swap to allow me to install it without relocating transfer cases and driveshafts. Anyone have any ideas? The current 240sx trans is 37" I believe. I would be ok with a 4 or 5 speed. My understanding from my resaerch also suggest the L20 and z-24 motors also use the ka-de bell pattern.
Thanx
2008-06-12 07:40:49
#2
The L20 will work. Where were the points that you measured and I will measure an l20 tranny that we have laying around this weekend.
2008-06-12 15:15:54
#3
Cool, just give me a total overall length of the trans from tailshaft seal to bell housing. I appreciate it.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top