Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: CAI adapters

+ Reply To Thread
Posts: 1-5 of 5
2014-03-07 04:00:46
#1
CAI adapters
My CAI seems to have snapped at the MAF Connector. The question is, where would I get a new intake adapter that fits the nissan bolt pattern (on the MAF)? My CAI is 3", and I found 3" adapters at the local auto parts store, but the bolt patterns do not line up. Not even close. suggestions?

MAF and plastic adapter for CAI photo intake_zpsbecea8ce.jpg
2014-03-07 04:23:41
#2
I've bought from the apexi website. Try itSpoiler
Last edited by hmumble on 2014-03-07 at 04-24-51.
2014-03-07 13:46:13
#3
just cut off the bolt holes and run a 3" cuppler. I run n62 blow through set up at 15psi so I know there will be no issue on an n/a set up.
2014-03-07 14:51:28
#4
I made mine out of some plate and tubing I welded together.
2014-03-07 16:56:05
#5
Originally Posted by Agent
just cut off the bolt holes and run a 3" cuppler. I run n62 blow through set up at 15psi so I know there will be no issue on an n/a set up.



I did the same. Once you cut the flange off a coupler fits it great. Mine's a n60.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top