Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: iacv help, sorry for bad descriptions

+ Reply To Thread
Posts: 1-1 of 1
2013-05-04 20:49:25
#1
iacv help, sorry for bad descriptions
hey all i have a 96 200sx se-r that is having cold start issues. if it is cold or has been sitting it will fire up and hit 1300 rpm then immediately die. it can not hold any idle above what it is set at(currently 1000). i cleaned iacv and the aav and have done a lot of reading and trouble shooting. the thing i need help with is i noticed today that the harness that goes to the long screw in part on the iacv ( out of the two harnesses its the on that goes to the straight piece that you can unscrew from the iacv... heres a pic cause i suck, its circled in red...

anyway when i put a meter or test light to it both wires have nothing. is this normal or should i be pulling something. i am thinking the wiring might be damaged upstream and its dead causing my issue. but if some one else knows or can check that would help. thank you very much sorry for bad descriptions
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top