Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: need help with a harness

+ Reply To Thread
Posts: 1-9 of 9
2008-05-11 18:50:29
#1
need help with a harness
hello evrybody i have searched for like two hours now and i am just going to stop and ask does anybody know if my engine harness from my 93 nx will work in a 94 ser i just picked up a shell and it has no harness
2008-05-11 19:35:46
#2
yeah i dont see why not, even though the 94 uses a lowport. but they should still work fine especially if your going to use a highport motor.
2008-05-11 19:48:37
#3
i dunno about that im not 100 percent sure but if i remember 91-92 harness is the same 93 is diffrent from both 91-92 and its diffrent from 94...
2008-05-11 20:01:59
#4
yes i plan on swapping in my highport motor that i have in my nx
2008-05-11 20:55:27
#5
you might have to make small changes to it but you will have to look it up. I know they are minor though. Nothing the wiring diagrams couldnt fix. doesnt the 94 have an electronic speedo, i think thats one of the main differences. forgot about that. but either way with minimal work you should be able to use it.
2008-05-11 20:57:55
#6
my nx has a digital speedo also i just want to make sure the connector inside the car and the connectors under the battery were the same
2008-05-11 21:03:10
#7
im thinking the ones under the battery are but the ones in the car may differ slightly. but again you should be able to make it work with minimal modifications.
2008-05-11 22:10:31
#8
alright thanks for the help
2008-05-12 16:29:57
#9
yeah i did the swap in my 94 sentra 1.6 to 2.0 and let me tell you the harness situation was stupid... try to get a harness that matches your year things will go easyer
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top