Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 155.00 aluminum radiator!

+ Reply To Thread
Posts: 11-20 of 27
2012-06-12 20:43:12
#11
Originally Posted by boomstickracing
i wonder how well it would fit in an nx with a stock manifold and t25


I'll take a picture as soon as I can.
2012-06-12 20:45:20
#12
the sam thats a small header btw... my radiator is fatter i think ill post up pics in a bit..
2012-06-12 20:46:30
#13
far from small, just well made
2012-06-12 20:48:00
#14
the bad is that u need to upgrade your condenser fan with a slim fan cuz the stock is too fat and you'll have clearance issues with the exhaust manifold, even worse with a header.. on the engine fan you'll barely clear the radiator hose or simply upgrade with a slim fan...


I think I would go with a push fans with how close those are to the header. Either that or would be a definate canidate for some Jet Hot coating. Probably worth it too.
2012-06-12 20:51:31
#15
- The Godspeed radiator I had was junk. It was DOA and I sent it back. I have a video on here of the proof. I have one mishimoto and might buy another one later for my daily. I bought a used KOYO once and it leaked as well. I've heard nothing but good things from mishimoto though.
2012-06-12 20:51:42
#16
i see the difference.. mine has different fan motors and my ssac header o2 sensor placement is in a bad spot.. and the radiator hoses are different also.. weird...
2012-06-12 20:55:48
#17
i'll post up a pic of how little room i have between the stock radiator and fans to the manifold in my nx.....i had to trim one of the legs on the fan for the o2 sensor.....neither fan is showing signs of heat damage.....new intercooler setup is restricting the air flow to my radiator....need more cooling capacity asap

thanks uly!
2012-06-12 20:56:12
#18
Originally Posted by MR-4Door-SR20DET
- The Godspeed radiator I had was junk. It was DOA and I sent it back. I have a video on here of the proof. I have one mishimoto and might buy another one later for my daily. I bought a used KOYO once and it leaked as well. I've heard nothing but good things from mishimoto though.


bought a used koyo for my 240... pretty happy with the performance thus far. bought it for 50bux wit a hole in one of the fins... costed 20 bux to weld... best deal while building my 240sx...
2012-06-12 21:14:50
#19
Here's mine and u can see my clearance issues but other than great rad!!

2012-06-12 21:22:00
#20
Originally Posted by Vadim
That's a lot, B15's and P11's have a double row all aluminum Silla rads for under $90 shipped.


True. Mod thos to fit b13's


But the $155 rad is more thick then the $80-100 silla vadim

P11/b15 silla rad


Last edited by Dema on 2012-06-12 at 21-38-20.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top