Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: does anyone make crossmember bushings

+ Reply To Thread
Posts: 1-10 of 10
2012-05-16 16:01:43
#1
does anyone make crossmember bushings
instead of stockers, does anyone make any urethane, plastic(delrin), or solid aluminum bushings for a b14? im talking about the 4 (2in back 2 in front) bushings between the crossmember and sub frame/core support that run front to back in the middle of the car.

thanks
2012-05-16 16:03:22
#2
http://www.sr20-forum.com/suspension-brakes/43462-ca-fs-p11-p10-b13-b14-b15-crossmember-aluminum-delrin-bushing-combo.html

There you go!
2012-05-16 17:24:25
#3
I have a set, very well made.
2012-05-16 22:30:04
#4
thanks guys ...orderd
2012-05-19 17:53:48
#5
Those look great, a little out of budget for me right now. I was at Ace Hardware and they have fairly large Nylon spacers that if the center was drilled out would be perfect for this. Those are only a couple bucks each, not as stable but a possible budget friendly option vs stock rubber. Not sure if I can use both the stock rubber and some nylon inserts, that would be better than stock. If it works i'll post some pics.
Last edited by NX2KTuner on 2012-05-19 at 17-58-17.
2012-05-19 18:29:07
#6
Sorta like this for $10?
2012-05-19 18:36:04
#7
^Yeah pretty much.

Great minds think alike!

Those extra's btw?
2012-05-19 18:38:04
#8
Sorry, no extras. Contact [email]rob_silvester@hotmail.com[/email] and ask him about his "wheel hop aids."

He has 2 different types, 1/2" thick and 1/4" thick. I purchased the 1/4" thick on put 1 on each side of the crossmember. Or, you can do the 1/2" thick and put it one side.

Although these were only tested on b15 sentras...I'm not sure of the difference in xmember bolts for b13/b14.
2012-05-19 19:03:15
#9
Originally Posted by mirrortints
Sorry, no extras. Contact [email]rob_silvester@hotmail.com[/email] and ask him about his "wheel hop aids."

He has 2 different types, 1/2" thick and 1/4" thick. I purchased the 1/4" thick on put 1 on each side of the crossmember. Or, you can do the 1/2" thick and put it one side.

Although these were only tested on b15 sentras...I'm not sure of the difference in xmember bolts for b13/b14.


Just sent him an email. Thanks for the referral.
2012-05-20 06:04:04
#10
Originally Posted by mirrortints
Sorry, no extras. Contact [email]rob_silvester@hotmail.com[/email] and ask him about his "wheel hop aids."

He has 2 different types, 1/2" thick and 1/4" thick. I purchased the 1/4" thick on put 1 on each side of the crossmember. Or, you can do the 1/2" thick and put it one side.

Although these were only tested on b15 sentras...I'm not sure of the difference in xmember bolts for b13/b14.


Your set looks much more polished then mine did. I installed Maxima bushings, they needed some fitting, they do move a bit more, but you don't feel the vibrations into the cabin as much as you do with Rob's bushings.

http://www.sr20-forum.com/751543-post1268.html
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top