Thread: competition clutch twin disk

Seems you've already generated quite a buzz. Maybe consideration is on the table for the FWD platform?

Doesn't Ashton has a CC twin disc?

Isn't it custom, tied to a 6spd transmission?

I thought he had it when he was 5 speed still.

Ok yeah he had the twin disc on the P11 trans 1st. back in 2010. He said he got the clutch from another forum member. Something happened to the splines on one of the discs. He said it was a CC and in the end they warrantied the clutch and saved him.

Umm I had a CC twin disk clutch when I was using the 5 speed trans. You just have to get the smaller splined disks. The rest of the setup is for the rwd sr20 except for the throwout bearing which was a bearing done by CC as well.

The setup is now offered for the 6 speed swap as well which uses a two piece flywheel with basicly an extended plate that is bolted and then flywheel rebalanced with it and of course the proper throwout bearing that has to be pressed into the stock throwout bearing housing. No biggie an can be done without a press easily.

I worked with Dan and Melissa at comp clutch on the 6 speed setup.

Again the rwd setup will work with the 18 spline smaller hub disk and proper thowout bearing.

I sold the old throwout bearing to a fellow forum member and have pics of what it looks like if the throwout bearing is an issue.

I shot an email over to Melissa for details on why the setup is currently listed as discontinued. I knew that we had a couple out in the wild but wasn't 100% on the exact details.

I have one as well ... 4-6057-B , and this is also the same P# that Motovicity has for the Twin disc for the FWD SR20 ( 5spd ), I used to have the 6spd swap one listed as well , but I don't see it anymore , I think it would be a shame to not have this clutch available to us in the community anymore , I understand it is not a huge seller , but it is a great product....I was hoping to be available for me to try to sell ....