Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Injector test results

+ Reply To Thread
Posts: 1-10 of 10
2012-04-26 22:48:12
#1
Injector test results
I just got my 370cc injectors back from being cleaned. I used Injector-rehab.com.

Injector #1, Static flow rate 432cc/min
Injector #2, Static flow rate 492cc/min
Injector #3, Static flow rate 432cc/min
Injector #4, Static flow rate 432cc/min

This was at 2.5 Bar, should they be this high? They also recommended replacing #2 which is obviously way out of spec. Does anyone repair these?

Thank you,

Nick
2012-04-26 23:01:07
#2
what did they flow them with? and why 2.5 bar?
2012-04-26 23:39:36
#3
Something seems fishy.
Lol at injector #2.
2012-04-27 01:10:53
#4
lol you got some freak injectors ! lolol that means they flow like 500cc at 3 bar lololol
2012-04-27 11:21:02
#5
Yea, not sure how they test these. But i need to replace #2 for sure.
2012-04-27 11:38:02
#6
370cc injectors usually flow 390cc when tested @ 3 bar. Not sure whats going on there.
Last edited by cortrim1 on 2012-04-27 at 11-53-46.
2012-04-27 17:58:44
#7
from thos numbers seems like you damn near have sti's outa the 370's......weird
2012-04-28 02:38:54
#8
hey Squirlz. if those are the ones i had,i ran those in my DE-T for about a month before i got my sti's. I used my Safc to control them and i had no problem at all at 3bar. Before i put those in my car i didnt get them cleaned or tested and i gad no problem. Those reading are very strange! They might have your results mixed up with someone elses.
2012-04-28 02:50:35
#9
Are we sure that wasn't a typo on their form and they really tested them at 3.5-bar?
2012-04-28 13:30:10
#10
I will call on Monday, either way they are not all matched. I have 2 more on the way that i will send in and hopefully get a matching set.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top