Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Just picked up a VE/RR oil pump. But my pickup looks diff...

+ Reply To Thread
Posts: 21-29 of 29
2012-08-30 12:28:59
#21
turbo guys running restrictors on the VE with all that oil pressure??
2012-08-30 12:37:07
#22
Already have them for all the small frame and ball bearing turbos anyway. These pump are important to me for the off idle and mid range oil pressure they maintain vs. the stock pump. A lot of the oil issues (spun bearings, etc.) seem to be happening on the DE motors (I understand it does happen on the DET and VE motors, just much lower percentage).

Brent
2012-08-30 12:58:21
#23
Originally Posted by nsusammyeb
turbo guys running restrictors on the VE with all that oil pressure??


nope, just stuck with the smaller -3 an oil feed line. No problems with blowing seals or any of that. Had i gone with -4 an line, then yes, I would have ran a restrictor.
2012-08-30 13:46:46
#24
heavy chevy
2012-08-31 05:48:28
#25
Originally Posted by Andreas
Pic of SR20VE - SR16VE oil Pump on Left and Pic of SR20VET-SR20VE 20V on right.



Are the pick up tubes different between these two pumps? I.e. shorter or longer than the other?
2012-08-31 10:08:11
#26
Originally Posted by dorsey61
Originally Posted by Andreas
Pic of SR20VE - SR16VE oil Pump on Left and Pic of SR20VET-SR20VE 20V on right.



Are the pick up tubes different between these two pumps? I.e. shorter or longer than the other?


They are the same.
2012-09-14 10:58:13
#27
So, to refresh the post a bit

I have a SR20DE UK, so its a 10:1 CR one with the red cover

My qouestion is colud this work?
VE pump
DE pickup (or only the VE can be bolt on, does it clear the DE oil sump)
DE pully
and a pully spacer that clears the pully from the oil pump

Will it be still in level with alternator, A/C, water and steering pump pulley?

thanks!
2012-09-14 13:13:33
#28
Parts list to make your life easy

VE pump
VE pully
VE spacer
VE oil pickup
VE upper and lowee oil pans

all that can be had for $300-$350
2012-11-07 08:04:45
#29
Mr Miko duo you know by chance know the difference in width of the oil pump gear between the VET oil pump and DET (non GTiR) oil pump ??
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top