Originally Posted by SENTRASER
5/8 hose if you're looking directly at the tb is right lower side of the plenum.
5/8 hose if you're looking directly at the tb is right lower side of the plenum.
That hose is run from the plenum to just before the TB. I had a nipple TIG welded onto my IC piping so it would get air measured by the MAF. When I unhook it it idles even worse.
Originally Posted by sr20det_GTI
i was having the same problem but cleaned the mainfold of carbon build up out etc found a vaccum leak and changed leads and now runs mint and make sure your fuel filter is round the right way as it can choke it from getting enough fuel and cause it to miss etc
i was having the same problem but cleaned the mainfold of carbon build up out etc found a vaccum leak and changed leads and now runs mint and make sure your fuel filter is round the right way as it can choke it from getting enough fuel and cause it to miss etc
No vacuum/boost leaks, but fuel filter is about a year old. I'll replace that with a 300zx one.