Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Would A NX Center Console / Armrest Fit In My B13 Sentra

+ Reply To Thread
Posts: 11-19 of 19
2011-09-13 17:34:39
#11
pm me. i dont wanna get bitched out for "threadjacking again" lol
2011-09-13 17:56:35
#12
fits in mine as mine is a 91 with no air back im rokin it also with a p10 lid the breadloaf!
2011-09-13 18:04:01
#13
It works, you just have to make a modification for the airbag thing if you have an airbag and you will also have to deal with the tight squeeze of the seatbelt buckle. I have the NX console in my Sentra.
2011-09-13 20:20:39
#14
Can y'all post pix please
2011-09-13 20:34:18
#15
Seriously? We've been putting NX consoles in SE-R's since, oh about 1991. The seat belt latch will rub on the side of the console, but it's not an issue, though it will scratch it up, so if you're so inclined, put some felt or heavy tape on the side of the buckle, to stop the scratching. Other than that, try and grab the console mounting brackets out of the NX as well, since one (or both?), are different than the SE-R mount.

You'll notice that the Tsuru rear mat nicely covers the airbag module. Also note that the 3" exhaust is not included.





C
Last edited by Chriscar on 2011-09-13 at 20-53-27.
2011-09-13 20:56:38
#16
One more thing, if the junkyard NX still has the seats, you can use the NX rails on your SE-R seats to lower them down about an inch, which comes in real handy for headroom clearance if you track the car and wear a helmet. Also grab the rail end covers, because they're different than the stock SE-R rail covers. Or you could sell them for $40 or so.

C
2011-09-13 21:05:43
#17
Originally Posted by Chriscar
One more thing, if the junkyard NX still has the seats, you can use the NX rails on your SE-R seats to lower them down about an inch, which comes in real handy for headroom clearance if you track the car and wear a helmet. Also grab the rail end covers, because they're different than the stock SE-R rail covers. Or you could sell them for $40 or so.

C


If you use thge NX seatbelt buckles they are longer and clear the console better,too
2011-09-13 21:09:11
#18
Originally Posted by eggman
If you use thge NX seatbelt buckles they are longer and clear the console better,too


or get the belts too and use those instead of the heavy ass belt system in the door. Save your hinges i say
2011-09-13 21:45:58
#19
Originally Posted by blurr.rt.by.you
or get the belts too and use those instead of the heavy ass belt system in the door. Save your hinges i say

Amen to that
NX seat rails,NX console and B14 belts and new hinges on my B13 were the first mods to my B13
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top