Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Removing egr

+ Reply To Thread
Posts: 1-2 of 2
2011-03-05 19:14:37
#1
Removing egr
hey i got an egr block off kit and i see that i should put a resister in to complet the sensor shown here:

http://www.sr20-forum.com/forced-induction-turbo/9558-how-remove-egr-c-e-l.html

my question is should i do the same to a.i.v sensor or no. i do plain on getting ride off the vacuum gallery and reroute the hoses shown here:

http://www.sr20-forum.com/forced-induction-turbo/250-rerouting-vacuum-hoses-jdm-intake-manifold-turbo.html
2011-03-05 22:31:00
#2
91-93 you should'nt need a resistor for the egr just leave the vac soleniod plugged in and wire tied up somewhare if your running a highport ecu or det ecu (blue plug obd1) . 94-up you will .
I'll explain when I meet up with ya tomarrow to drop off the head .
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top