Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Need some help here...

+ Reply To Thread
Posts: 1-10 of 10
2011-02-06 23:19:12
#1
Need some help here...
I have a 91 nx2000 and last night I was driving and turned into my girlfriends driveway and my cars pretty low. Next thing you know my car shut off and killed power to pretty much everything all I had was a headlight and the ignition power still works so i could drive the car but had no cluster,brake lights, parking lights, pretty much nothing checked all the fuses and found none that were blown and im pretty much stumped here.... and help is appreciated
2011-02-06 23:57:30
#2
check the bulbs in the tail lights an turn signals just because. also look under the car for any wiring that may have been pinched or broken.

also recheck the fuses, if you have a multimeter it can be useful cause sometimes a fuse will brake an its hard to tell..

the only other thing i can think of would be the fuseable link or maybe some under hood fuses..

hope that helps
2011-02-07 00:04:30
#3
it does indeed sounds like a fusable link under the hood....i had a b-12 sentra that did that same crap...you gotta like move the wire of the fusable link tho...sometimes it's burned too far through to work but still connected...it'll just fall apart if you try to move it if it's bad(most of the time).a multi-meter like Lynch said is prolly the best way to be sure they're good
Last edited by boomstickracing on 2011-02-07 at 00-05-38. Reason: i can't spell
2011-02-07 00:06:54
#4
ya i had to chase down an electrical gremlin in the g20 when we first did the ve swap, every time i connected the battery it would arc really bad, turns out the starter wire was touching both posts on the solenoid an it fried one of the fuseable links under the hood so the ecu wasnt getting any power..
2011-02-07 15:30:26
#5
Thanks for some input I checked every fuse and fusable link, every pulg I could find and nothing seems out of order, just confused how I can have ignition power and head lights, but yet everything else is dead
2011-02-07 15:49:57
#6
Fusible link.
2011-02-07 19:00:33
#7
The only link this thing is about to see is the chain that pulls the motor out and then the one that. Pulls it onto the flat bed to get scraped..
2011-02-07 20:23:12
#8
how did u check the fuseable links?
2011-02-07 21:13:51
#9
Just by replacing them with other ones I had from my 93nx ill check them with a meter when I get off work but they all seem fine to me
2011-02-08 15:30:33
#10
Checked all the links with the meter they all seem fine, is there anything else you can think of?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top