Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Relocate ECU pins.

+ Reply To Thread
Posts: 1-3 of 3
2011-01-10 18:39:28
#1
Relocate ECU pins.
Before my motor swap I picked up a p10 ecu. I installed the ecu.. and because of the 1999 EGR crap it throws codes as well as rear o2 sensor.

But I would like to find out how to remove the wires that need to be swapped without messing up the pins. Any info on this?

Here is the link to what I'm trying to do: http://jimwolftechnology.com/wolfpdf/WIRING98SENTRASR20TO95-97ECUWIREMOD.PDF
2011-01-11 00:16:43
#2
On the back side of the ecu connector at least on the b13 obd1 ecu connector there is a flip up tab and then through the front of the connector you have to lift the locking clip and pull the wire out the back. Just look inside the connector and you will see what you need to do.
2011-01-11 00:39:09
#3
I need to know this as well...
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top