Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Car won't go into gear.

+ Reply To Thread
Posts: 1-10 of 19
2010-11-10 22:52:38
#1
Car won't go into gear.
Drove home last night no problem. Went to leave for work this morning and it won't go into gear. Clutch cable is adjusted all they way out. Car has been making grinding sounds for a couple weeks which I figured was loose springs on the clutch disk bouncing around.

Did they finally fail? Release bearing has been making lots of noise too.
2010-11-10 22:54:31
#2
what kind of clutch are you running?


the throw out bearing is most of the time the culprit.

replace with OEM nissan one and u should be good.
2010-11-10 23:24:15
#3
No idea what's in there. Guy I bought the car from said he changed it not long before my purchase. This car has been nothing but problems, and was certainly not worth the $1,500 I paid for it.
2010-11-10 23:36:32
#4
can you out in gear with the engine off? It's probably your clutch disk
2010-11-11 00:31:17
#5
It will go in gear when the car is off.
2010-11-11 00:37:45
#6
sounds like what happened to my old p10, guarantee its the clutch disc. the springs broke out of the casing and is jamming it up. 2 nissan value clutches did that within a year. ended up buying one from another auto parts place then selling the car.
2010-11-11 01:05:15
#7
CLUTCH DISk for sure.. had the same problem. Competition Clutch Brand FTL!
2010-11-11 03:02:15
#8
That's what I figured. Thanks guys.
2010-11-11 16:00:20
#9
Just to confirm, a B15 clutch will fit a '94 flywheel, correct?
2010-11-11 16:19:32
#10
yes it would
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top