Thread: injector failure

can I replace just one or do I need to do all 4??


this is on my 1.6 not the Sr20, reason I'm asking is this thing is starting nickle and dime me every week,,, it's also starting to look as if it's to BEGGING for an Sr20 swap.


I'm willing to keep fixing the bad problems and not give up yet but if it's more practical to just change directions I'd rather not waste money that I don't have to just throw away..

yes you can just replace one but its usually easyer to just get a whole another rail with injecters and replace everything at once

the problem I'm finding is the injector's are priced very high local not sure about the brand name either,,




so I need to find someone that has a full rail with injectors huh?

You can replace only one. Just had to do that with 1.6 NX. I got an injector at the local U-Pull junkyard from a 1.6 Sentra for four bucks.
The # 1 cylinder injectors seem to go first so I bought the #3 injector from the Sentra just to be safe.
If you can't find one at the junk yard, I think there is a 1.6 forum.

ok,,, thanks. I'll try that tomorrow if I can get away from work in time.

other than that I have a friend looking on the Ga16 forum for me


thanks for that bit of advice,