Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: BC Stage 2 cams & Lightweight pulley set

+ Reply To Thread
Posts: 11-15 of 15
2008-02-24 04:28:05
#11
Originally Posted by RabidRaccoon
I'm not sure about the pulleys, but I believe the RWD cams are a little different than the FWD cams so you do NOT want to get the ones made for S13/S14 (RWD).

Forum members, please correct me if I am wrong here.

On the other hand, I did notice that they only list cams for the S13/S14 and do not list them for B13/B14, so maybe they are the same. You could always call Brian Crower and ask...


from what was posted on the great list of cams by Calum on the other forum, the only difference between fwd and rwd cams is the dowel pin on the exhaust side. the rwd's dowel pin is longer so i can spin the cam angle sensor. i believe that rwd cams work in fwd with the longer pin but fwd cams in rwd needs the pins swapped.
2008-02-24 05:12:55
#12
Originally Posted by eggman
did the OBX pullies end up having timing marks? Last I heard,nobody knew.


the marking dont really matter 100% becuase before you swap the crankshaft pulley, just use the oem pulley to advance the timing and mark it on the distributor side and do the same for stock timing... that way you know where advanced and stock is....crankshaft pulley marking are nice ,but for the price its not that big of a deal
2008-02-24 06:03:55
#13
I have a set of OBX and I can't remember if there are timing marks on the crank pulley, but I'll check tomorrow when I go back out to the garage for some more wrenching.
2008-02-24 16:15:09
#14
Originally Posted by GT2871RBLUBIRD
the marking dont really matter 100% becuase before you swap the crankshaft pulley, just use the oem pulley to advance the timing and mark it on the distributor side and do the same for stock timing... that way you know where advanced and stock is....crankshaft pulley marking are nice ,but for the price its not that big of a deal


Yeah,Thanks...I know how to do this but you shouldn't have to do that.If they are gonna clone(rip off) a design....they should steal it all
2008-02-24 17:12:49
#15
true, but in the same sense if they are going to go though all the trouble to be legit, then they would have a legit price, considering the unorthadox pullies are over 300.00 and the knock offs are less than 200.00.... cant really complain
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top