Thread: spec v trannys on ebay

ive seen them for cheaper than that. Ive seen them all the way down to 250 and 275 for an 02 or 03. The 04's usually go for 350-400 as they had the longer final drive and longer 4-6th like the 03 came with but a 4.1 Final drive instead of 4.4X

Mazworx has the kit to bolt these trannies up.

Andreas is in the work for a 225mm flywheel to accept a 240sx KA24 clutch kit.

Im in the process of having a flywheel made for a Competition Twin Disk setup.

So for those going for big power, Twin Disk setup FTW
For those NA or smaller turbo's staying less than 350-400whp then you can use the single plate clutch with 225mm flywheel

Both of these should be out there ready for purchase within a month.

Mazworx has the p12 bellhousings and mount kits in stock.

Mine will be done and out on the road when this flywheel for my twin disk gets completed.

yea the trans is fairly cheap, a little harder to find the 04+ though.

Had a local guy willing to sell me one for $150 but I lost his number...go figure FML.

When my b14 trans gives, one of these will be going in though, for sure, but I'll be going with a fab'd adapter plate instead of the p12 bell.

Is there enough room for an adapter plate?

mazworx makes one, the bellhousing could be shaved as well if need be.

may i ask why? You know that requires you to shave the bellhousing down the thickness of the adapter plate right. Its soooo much easier to use the P12 bellhousing.