Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Teins installed wrong? Pics inside.

+ Reply To Thread
Posts: 11-16 of 16
2008-02-21 15:42:52
#11
Originally Posted by Old
The wide spaced coils should be on the bottom. They will move the most during compression and represent less moving unsprung weight.


I had tein springs at one time (s-tech) and you do have the rear springs upside down. Other than that, you'll wish you never bought them.
2008-02-21 17:05:32
#12
Well I didn't buy them the last owner did. We are gonna give them a chance with the agx's that we got coming our way. I have the pro kits and I'm fairly satiesfied with them.
2008-02-21 18:31:01
#13
just look for the tein written on spring. face it where you can read it.
2008-02-21 21:51:09
#14
Originally Posted by MR.
Well I didn't buy them the last owner did. We are gonna give them a chance with the agx's that we got coming our way. I have the pro kits and I'm fairly satiesfied with them.


I had them on agx's and the front is still way too soft on the hardest setting. Replace the front springs with something else and your fine. I'm just trying to save your shocks because you will be bottoming out frequently.
2008-02-21 23:06:40
#15
Do you have some rust in your car, if so please check [url]www.noxudolusa.com[/url]
They have some good rust protection chemicals.
2008-02-22 01:27:30
#16
Originally Posted by Ronald
Do you have some rust in your car, if so please check [url]www.noxudolusa.com[/url]
They have some good rust protection chemicals.


The car has 0 rust. That right there is just old dirt.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top