Thread: Crank Angle Sensor/Crank Position Sensor

Whats the difference?
I am throwing a 1-1 and depends on what you read, it says either
I have a JDM Auto motor swap in my car.
Where is it? It is from this thread:
http://www.sr20-forum.com/general-sr20/35457-horrible-idle-another-thread-archives.html

It will be the Cam Angle Sensor which is in the distributor in the FWD SR20's.

And I happen to have a spare distributer....

And this is how I got rid of the same CEL with my JDM swapped B13.

You had to swap distributers? The older one I have here leaks. Thats my only problem

Actually just the sensor, but it's easier and cheaper to source a whole dizzy.

I swapped dizzys, same issue occured. I got to get another one and try to track down further my start up issue.

Have you checked the wiring between the CAS and the ECU? I have known cars to be hard to start because of faulty Cam Angle Sensors.

Will try that another day, got a headache...