Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: auto to manual 1.6-2.0 help

+ Reply To Thread
Posts: 1-2 of 2
2010-07-30 00:44:43
#1
auto to manual 1.6-2.0 help
I have searched and found some answers but they are mostly for the b14 sentra. Here is the deal. My friend has a 1994 Sentra LE that we swapped in the sr20de and we couldnt get it fire up. Main reason is because I couldnt find the clutch inhibitor switch. We made this car from Auto to Manual. Made the holes for the clutch pedal. Everything Went smooth. The only thing that is missing is we dont know how to get it to fire up. I read that you can splice into the relay and make it jump of some sort but I couldnt find enough info on it. So im coming here to ask for some help.

I need to know what wires to connect. I used the entire engine harness. I have not taken out the dash harness from the car. Thanks for the help. This is just a auto to manual swap 1.6 to 2.0
2010-07-30 03:17:48
#2
over by the battery above the trans there are 2 or 3 power plugs I bet that the 1.6 ones differ from the 2.0 ones. on my b14 swap the harness plugged in but there were more pins used on one vs the other. so i had to splice the coordinating colors together. mine did the same thing and i dont have the inhibitor switch overridden. once spliced it fired right up. If you have any q's pm me
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top