Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Low lumpy idle at start up and hitting a wall during acceleration (the feeling of it)

+ Reply To Thread
Posts: 41-46 of 46
2010-09-11 21:36:47
#41
Originally Posted by ...
I just read the whole thread and can't remember if you have replaced the maf or not...


I did a completely different thread about that 0101 vs P0101
2010-11-21 22:04:03
#42
I am having the exact same problem right now, coupled with a gas mileage problem.

I will be changing out the CTS to see if that helps...
2012-02-02 01:29:33
#43
Having similar issue...inluding gas problem...
2012-02-02 01:32:30
#44
I actually forgot to follow up, it was a timing issue combined with a small leak on a vacuum hose leading under the manifold.
2012-02-02 03:48:49
#45
I never followed up, sorry, it was the distributer. The Crank Position Sensor was no bueno.
2013-07-06 02:53:13
#46
Thanks, for the posts. I know i am diging up an old thread but this seems to have solved quite a bit of my idling issues.

I think i am going to re build my aeromotive fuel pressure regulator as well as it seems to be seeping a bit which could be part of my idle/low throttle fueling issues.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top