Are my vacuum lines correct
I'm trying to figure out a miss in my partial throttle so i figured i would at least make sure these are correct
Heres my vacuum line routing.
Wastegate goes to electronic boost controller
boost controller goes to small nipple under bov on ic piping.
top nipple of bov goes to a nipple on the intake manifold
then behind throttle body, one nipple goes to fpr
the other nipple goes to a t, which is for electronic boost controller and boost gauge
i then have the bottom nipple on tb closed off
Is this right?
I want my car running 100% by this weekend, wot it was a champ, but normal driving i want to punch my car in the face
here is my build thread, http://www.sr20-forum.com/members-rides/22914-duesmandella-1993-sentra-se-r.html.
You can see i took everything out, but im almost 100% sure i put everything back together correctly
Heres my vacuum line routing.
Wastegate goes to electronic boost controller
boost controller goes to small nipple under bov on ic piping.
top nipple of bov goes to a nipple on the intake manifold
then behind throttle body, one nipple goes to fpr
the other nipple goes to a t, which is for electronic boost controller and boost gauge
i then have the bottom nipple on tb closed off
Is this right?
I want my car running 100% by this weekend, wot it was a champ, but normal driving i want to punch my car in the face
here is my build thread, http://www.sr20-forum.com/members-rides/22914-duesmandella-1993-sentra-se-r.html.
You can see i took everything out, but im almost 100% sure i put everything back together correctly