Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Power steering rack to manual rack B13

+ Reply To Thread
Posts: 1-4 of 4
2010-03-29 20:23:28
#1
Power steering rack to manual rack B13
I just got a b13 manual rack..I know I need the u-joint and brackets ..is there anything i can reuse from my power steering rack? Or any other parts i would need to complete the conversion?


thanks for your help and time
2010-03-29 22:23:58
#2
fyi: don't buy poli rack bushings they don't fit the manual rack

if you call them or send them an email with this picture in it I bet any reasonable parts person could figure it out
2010-03-30 19:11:19
#3
Originally Posted by skcusloa
fyi: don't buy poli rack bushings they don't fit the manual rack

if you call them or send them an email with this picture in it I bet any reasonable parts person could figure it out


thanks..i just re edit the question
2010-08-22 01:53:31
#4
i'm in the same procedure by now and i can tell you that other than the rack you need to change the passenger side bushing for the rack i think the bracket fits just fine and very important the Joint between the rack and the steering wheel assembly. I can't tell you by now if the boot also change somebody told me it change but i haven't try that. Good Luck!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top