Thread: Oil filter options?

On the sr20 I only know of the (fram sizes) 6607 and 7317, are there any bigger oil filters that would fit?

Let me do some research at work and i'll let you know. Does anyone know the thread size and pitch for the stock oil filter?

i use purolator L14610 for a RR motor or nissan number 15208-9e000 these are actually for a VQ30 motor


you can also use a honda filter

OEM > all

You should open up an OEM filter and compare it to a Puralator.

You will see that OEM is NOT better.

Never, ever buy Fram. Unless you think oil drain-back isn't a big deal.

I once had a off the shelf oil filter pop off on me (don't remember the brand). So since then I refuse to use anything other than OEM.

I've used all sorts of different filters. I will never EVER use Fram filters. And they are considered the "higher grade" filter at my work. Rediculous. So i sell them to people if they want them, but i refuse to use them.

I use purolator purone filters.

I once had an OEM filter not filter my oil as well as other aftermarket alternatives. So since then I have only been using aftermarket filters.

Well which of the filters are the biggest you could fit? See, I have an aftermarket oil cooler and the small filters for the sr20 have too small of a diameter so it leaves a gap around the filter housing. The thread pitch and size are the same but I need something with a bigger filter housing.

What year is your motor? 95+ USDM motors have a metric fitment and the smaller size filter.