Thread: Brights do not turn on after TSURU install

After installing my Tsuru headlamp conversion I noticed that my brights aren't working properly. Basically, when I turn on my brights the driver's lamp turns to bright, however the passenger side lamp turns off. Has anyone had this problem, and does anyone know the solution. Thank you -Mike.

Not sure how to fix your problem, but I just wanted to say welcome back...

Thank you, I appreciate it. It has been quite a long time.

either you wired the passenger one wrong or your fuse is blown. check on the driverside area around the battery and the fender.

try swapping the bulbs from right to left.. if the problem switches sides its the light bulb... i've seen brand new bulbs not work so its possible..

I had this happen to me before in my b13 with my factory lights. You need to check your headlamp fuses. Let me know what you find.

^I'm gald this thread came up. My driver side bright light would not work on my factory setup. I replaced it with 3 different bulbs and the problem remained. I just installed my smoked tsuru headlight kit and I didn't think to turn on the brights to see if the driver side would come on or not. I'll do this and report back. Check the fuse under the hood, or under the steering wheel?

^ check the fuse under the hood on the driver side fender.

the fuse next to the battery

^I'm bumping this back up. Both of the 15A fuses are good beside the battery. Bright lights still do not turn come on from the driver side. Only the passenger side. I checked the wires and nothing looks like it has been cut or messed with from a previous owner. Any more ideas?