Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: What belt to use with Greg V pullies?

+ Reply To Thread
Posts: 1-4 of 4
2008-01-20 22:13:50
#1
What belt to use with Greg V pullies?
Well I purchased Greg V pullies some time ago (great price and fast shipping btw) and I don't know what belts I should use with the Greg V VVL crank and water pump pulley. I have a DE with ac, ps, stock ve crank pulley. So would factory belt work?
2008-01-21 18:41:24
#2
Are you using both of his pulleys? I am using both but i removed my AC. What i did was cut the stock belt then wrap it around with the tensioner in the middle, mark where it meets, then measure the length. Go to the parts store with the stock belt and tell them you need one with this many ribs but this length. I had to go to 5 ribs on the one belt but it works fine.
2008-01-21 23:18:43
#3
I'm planning on using both pulleys.
2008-01-22 00:23:15
#4
Are you keeping AC? if not i can give you the belts i use and save you some time. Otherwise as i said try to find a belt that works.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top