Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Bought a JDM RR!

+ Reply To Thread
Posts: 11-13 of 13
2008-01-07 19:58:56
#11
Originally Posted by Andreas
I have installed many a Highport in a B14 and did not need to rewire or extend any wires in the B14 harness.

All the wire have no problem getting to where they need to go.

Now when you put a low port in a B13 there are a few wires that need to be extended


you mis understood my post. i took an engine harness from a 91 se-r and used it in my b14. i had to rewire the underdash plugs as well as the starter harness. i was saying that he would need a b14 harness and ecu for that engine unless he wanted to do what i did.
2008-01-08 05:15:07
#12
Hmm so i would need to find a b14 ser to get it to work?!?! if so that sucks! Bet id find 5 b13 ser's before finding a b14 around here! So Dre is using a p10 G20 harness and ecu wont let me rev to 7.5k? what setup were you running when you did the swaps? I would like to retain the JDM Mani, we dont have emissions or inspections here, will that cause any problems?

Thanks guys!
2008-01-08 05:37:29
#13
i used to rock the RR motor in my b14
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top