Originally Posted by
LongJon which fuse did you replace to get your cluster working? im having a similar problem, my tachometer wont work.
I believe it was the third relay down under the dash. There is a metal cover you have to remove after you take off the plastic dash trim piece under the steering wheel. I think that one was it... you can just switch them out and you'll figure which one it is.
Also keep in mind my whole dash was off not just the tach.
Cyl 3 had no chance!
There is oil in the cylinder and it was apparent is probably a ring gone because there was some oil dripping out of the #3 exhaust port... Coolant was orange and didn't have oil in it.
The motor is on the floor and right now it will be a donor motor until I can get it on the stand and maybe rebuild it down the line. I'll have to see what the walls look like.
I totally forgot about this thread
I've since sourced another motor so all is good.