Thread: Car died after start up

STORY:
Friend bought a car - Primera SR20De 125hp. It wasnt starting. He found one plug and plug wires were damaged. He changed both. After that, car start, BUT.. it dies 1-3sec. after start up. If you push throtlle, it dies.

Here is video: http://www.netboxhub.net/200sx/MOV01362.3GP

Any ideas? MAF was changed, distributor changed, FPR is ok, ..

btw. the strange sound on video, it was due bad ignition. Ignition is set up well for now withnout this sound, but still dies.

Do You Have An Extra Ecu He Can Try On?

Also how long has the car been sitting with that gas ?

remove fuel line goin to the rail an see if its shooting out gas..
its a spark /fuel problem...

He tried P10 GT ECU from 91, but this is 95 model and it has 64kB ECU than older 32kB ECU what i know. But results with this ECU was the same.

Btw. Diagnostic with Consult wasnt found any problem.

make sure ignitor is plugged in.

Check to make sure the wires are in the correct order. Should be hard to do but it is a possibility. They should be labeld on the distributor.

updates?

Still same. He is waiting for another 95 P10 ecu.