Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: B13 AT axle question?

+ Reply To Thread
Posts: 1-8 of 8
2009-03-09 12:14:56
#1
B13 AT axle question?
can I use B13 SER AT axles on a MT with LSD ?
2009-03-09 15:11:54
#2
Nope, they are different lengths, and I'm pretty sure the splines are different.
2009-03-09 15:44:19
#3
^What about the passenger side? Is it just MT LSD and NON LSD passenger sides that you can interchange? I know the driver side will be different. I had a set of AT axles, but I sold them before I got to compare them to the MT axles.
2009-03-09 15:46:53
#4
I'm thinking that the splines where it goes into the tranny are what's different. Can't remember for sure.
2009-03-09 23:23:40
#5
Pass side is the same between lsd, non lsd, auto, and manual. It's the driver side that changes.
2009-03-09 23:25:21
#6
Hmm, there was something about mine that didn't work when I did the swap. Not sure now what it was though. I still have the auto axle somewhere, I'll check it out.
2009-03-10 02:33:36
#7
Originally Posted by jer_760
Pass side is the same between lsd, non lsd, auto, and manual. It's the driver side that changes.


^That's what I was thinking. Thanks for confirming.
2009-03-10 02:54:38
#8
Thanks a lot guys, I'll try the passenger side to verify, are the cv joints compatible? I think it should be the same as the MT
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top