
I'm not getting any fuel in cylinder 4. However, when I test for injector operation on a different cylinder connector (1, 2, or 3) I can hear/feel the clicking of the injector. When I test the same injector on cylinder #4 connector I do not hear anything. I measured voltage across the terminals and it was there. I haven't measured resistance but that shouldn't make a difference if I'm getting voltage, should it?
Also, I've tried 3 different injectors. I also know I'm getting spark as I have tested for that as well.
The injector harness for #4 is hacked up, and I'll try repairing that next, but the fact that it had proper voltage makes no sense to me.
Any thoughts or tips should be helpful. I'm down to improper resistance and crappy harness connection, but if anyone has any other ideas of what it could be please let me know.
Also, I've tried 3 different injectors. I also know I'm getting spark as I have tested for that as well.
The injector harness for #4 is hacked up, and I'll try repairing that next, but the fact that it had proper voltage makes no sense to me.
Any thoughts or tips should be helpful. I'm down to improper resistance and crappy harness connection, but if anyone has any other ideas of what it could be please let me know.